2014 Meyer V-Force 7500 Truck Mount
Call for Price
Key Features
Availability
Brochure
Year2014
MakeMeyer
ModelV-Force 7500 Truck Mount
Product Features
Description
Features
- A "T-Post" Auger hold down system creates a larger opening for foreign objects to pass through.
- All Meyer V-Force Spreaders feature three augers constructed of massive sectional flighting. Thrust bearing and aluminum-bronze sleeves on the drive side of the auger reduce stress and horse power requirements. Steep tank sides constructed from heavy gauge, rust resistant steel are just plain heavier than the rest!
- Auto Oiler will automatically oil your roller chains each time you operate the tailgate. Operator maintains easy access to components, unlike oil bath designs.
- Easy Serviceability - Grease banks provide quick maintenance from ground level.
- Hardened expeller jaws are easy to replace and less expensive than pivoting hammer systems.
- Individual Bottom Auger Shear Hub Protection safe guards your investment and allows you to unload even with one auger obstructed. Standard feature of the 7500 V-Force Spreader
- Meyer Super Spreaders can be truck mounted for fast over the road transport to your fields. Meyer units are adaptable to a wide range of trucks and also terra-gator systems. Drive options include both PTO and hydraulic.
- Spread pattern will vary from 18'-30' wide depending on material density. Application rates can be reduced by changing auger speeds.
- Super Spreader's patented rear unload design- Material is directed straight out the large back gate of the spreader by two lower augers while the upper auger runs forward to eliminate bridging. This system requires much less horsepower and unloading time than side discharge spreaders. And the tractor and spreader stays clean regardless of wind direction.
- The optional Hydraulic Lid is available. The lid provides cleaner transportation and less odor pollution. right or left opening.
- The rear discharge features massive 22" diameter tilted expellers, 1/2" bolt on jaws and heavy duty direct drive. Notice the break-away material guides which provide maximum spread performance and protection from foreign objects.
Engine
- Roller Chain Drive: (Augers) #80-#120 ; (Expellers) #80
Transmission
- Drive: PTO Direct
- Driveline: (Protection) Torque diconnect clutch w/shear bolt augers - PTO
Chassis
- Frame: (Construction) Heavy 8" Channel
Dimensions
- Auger Diameter: (Lower) 20" - 3/8" sectional
- Capacity: (Bushels Heaped) 500 ; (Gallons/Cu. Ft., Struck) 2433 / 324 ; (Cu. Yards, Struck) 12 cu. yards
- Diameter: (Expellor) 22"
- Door Opening: 27" x 42"
- Height: (Overall - Top of Splash Guard) 67.5" plus height of truck
- Length: (Overall) 18'4" plus front drive ; (Inside Tank) 15'
- Loading Height: 60.5" plus height of truck
- Max. Net Load: (Lbs.) 23000#
- Speed: (Expellor) 660 RPM
- Thickness: (Tank Sides) 3/16" ; (Front/Bar) 3/16"
- Weight: 7080 lbs
- Width: (Top Tank) 85 7/8"
General Information
- Standard: Ind. Lower Auger Shear Hub Sprockets ; 3rd Auger (solid material) ; Roller Chain Auto Oiler ; Splash Shields -front & rear - angled ; Transport Lights w/truck cord ; PTO - Direct
- Tank: (Construction Material) Copper bearing steel
General
Weight | 7080 lbs |
Hopper Capacity | (Bushels Heaped) 500 ; (Gallons/Cu. Ft., Struck) 2433 / 324 ; (Cu. Yards, Struck) 12 cu. yards |