2019 Massey Ferguson 1844S
Call for Price
Key Features
Availability
Brochure
Year2019
MakeMassey Ferguson
Model1844S
Product Features
Description
Innovation
- Fork it over: A new packer fork with revised spacing significantly increases feeder capacity in a wide range of crops and conditions
- Pre-compression rocks!: Our pre-compression chamber starts building density before baling to reduce plunger load, lower HP requirements and increase baling capacity
- Picked clean: Enhanced pick-up cross augers provide additional pick-up capacity, particularly in large windrows and uneven crops
- Bigger bale chamber: Our OptiForm™ bale chamber for the 1840 has been extended by 18 in. to ensure consistent bale shape and density in all conditions.
Capablity
- Delicious, nutritious: Since each bale flake is pre-formed before it goes into the bale chamber, the nutritious leaves are more evenly distributed throughout the bale
- Take the plunge: Short plunger strokes in the 1800 Series reduces wear on the baler, prolonging component life and increasing reliability
- Set it & forget it: A gauge lets you preset bale density to keep bale density and weight constant even as hay moisture conditions change through the day
- In-line everywhere: Because field and road positions are one and the same, you save time when you’re on the move
Bale Size
- Size of chamber in. (mm): 15 x 22 (380 x 560)
- Bale length in. (mm): 12 to 52 (305 to 1,321)
Dimensions & Weight
- Length w/bale chute in. (mm): 285 (7,239)
- Width (overall) in. (mm): 104 (2,642)
- Height w/shielding in. (mm): 69 (1,753)
- Baler weight, approx. lbs. (kg.): 8,000 (3,632)
- Tongue weight lbs. (kg.): 1,030 (468)
Tires
- Flotation: 14L x 16.1, 12 Ply
- Pickup gauge wheels: 4.00 x 16 pneumatic w/ inner tube
Pickup
- Drive: Drive shaft and roller chain
- Width - Tine to tine in. (mm): 70.2 (1,783)
- Width - Inside panel to panel in. (mm): 77.5 (1,969)
- Width - Outside panel to panel in. (mm): 91.2 (2,317)
- Width - Overall w/gauge wheels in. (mm): 108.5 (2,756)
- Number of tine bars: 4
- Number and type of tines: 56, double tines
- Tine spacing in. (mm): 2.6 (66)
- Tine control: Dual camtracks
- Protection: Slip & overrunning clutch
- Augers - Length in. (mm): 33.5 (852)
- Augers - Shaft size in. (mm): 1.38 (34.9)
- Augers - Speed RPM: 278
- Gauge wheels: 2 (one per side)
- Pickup lift: Hydraulic cylinder
Feeding System
- Stuffer: 6 tines
- Protection: Shearbolt
Plunger
- Speed: strokes / min.: 90
- Length of stroke: in. (mm): 21.9 (556)
- Mounting: 10 sealed ball bearing rollers
Tractor Requirements
- Minimum PTO HP (kW): 80 (60)
Hydraulic System
- Type: Self-contained
- Pump displacement gpm (L/min): 3.6 (13.6)
Towing Vehicle Requirements
- Weight, minimum lbs. (kg.): 5,700 (2,588)
- Electrical: 12 V DC w/ ASAE 7-pin connector for warning lights
Dimensions
Length | w/o bale chute: 285 in. (7239 mm) |
Width | 104 in. (2642 mm) |
Height | 69 in. (1753 mm) |
Weight | 8000 lb. (3632 kg) |
General
Bale Size | Size of Chamber: 15 x 22 in. (380 x 560 mm); Bale Length: 12 to 52 in. (305 to 1321 mm) |